Keystone Harley-Davidson® 25,000 Mile Maintenance

(WILL VARY BY MODEL)

• Change engine oil and filter 
• Inspect oil lines and brake system for leaks 
• Inspect air cleaner and service as required
• Check tire pressure and inspect tread 
• Check tightness of wheel spokes 
• Replace transmission lubricant
• Check clutch adjustment 
• Check primary chain adjustment 
• Inspect rear belt and sprockets and adjust belt
• Check, adjust, and lube throttle, brake enrichener & clutch controls 
• Inspect fuel valve, lines, and fittings for leaks 
• Clean fuel tank filter screen
• Check brake fluid levels and condition 
• Inspect brake pads and discs for wear
• Check front brake lever pin
• Check brake caliper pins 
• Check brake caliper boots and bushings 
• Check rear master cylinder outer boot
• Replace brake rubber components in master cylinder pistons and calipers. 
• Lube master cylinder pistons. 
• Check spark plugs and replace if necessary
• Check operation of electrical equipment and switches 
• Check and adjust engine idle speed 
• Inspect shock absorbers
• Road test